Valve Body Harness Check
WARNING: This page is about a different variant/trim than selected.
- Disconnect the CVT assembly connector.
- Remove the oil pan. (Refer to OIL PAN AND VALVE BODY ASSEMBLY )
- Disconnect the valve body harness connector.
- Check for continuity between the relevant CVT assembly connector terminals and the valve body harness connector terminals.
Item Terminal number Resistance value CVT assembly connector side Valve body harness connector side Line pressure solenoid valve 1 5 Continuity exists (2 Ω or less) 1 Other than above No continuity Primary pressure solenoid valve 2 12 Continuity exists (2 Ω or less) 2 Other than above No continuity Secondary pressure solenoid valve 3 4 Continuity exists (2 Ω or less) 3 Other than above No continuity Select solenoid valve 4 2 Continuity exists (2 Ω or less) 4 Other than above No continuity Lock-up solenoid valve 5 3 Continuity exists (2 Ω or less) 5 Other than above No continuity Primary pressure sensor 13 11 Continuity exists (2 Ω or less) 13 Other than above No continuity Secondary pressure sensor 14 9 Continuity exists (2 Ω or less) 14 Other than above No continuity Sensor ground 18 8 Continuity exists (2 Ω or less) 18 Other than above No continuity Sensor power supply 22 10 Continuity exists (2 Ω or less) 22 Other than above No continuity - If not as specified, replace the valve body harness. (Refer to OIL PAN AND VALVE BODY ASSEMBLY )