Section 231 (Power Liftgate (Service Information)): Chime: Installation
WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the power liftgate chime (3) to the left inner D-pillar (1).
- Install the chime housing integral retainer to the inner D-pillar.
- Connect the chime pigtail wiring harness connector to the chime wiring harness connector (4).
- Install the integral chime pigtail wiring harness retainer to the inner D-pillar.
- Install the quarter trim panel to the lower left inner D-pillar. Refer to PANEL, QUARTER TRIM, INSTALLATION .
- Install the scuff plate onto the liftgate opening sill (2). Refer to PLATE, SCUFF, LIFTGATE, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.