LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Outlander GT >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Starting System (Service Information)) >> Relay, In-Rush Current Reduction >> Installation

Relay, In-Rush Current Reduction: Installation

WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159959Courtesy of CHRYSLER GROUP, LLC
  1. Position the In-Rush Current Relay (ICR) to the bracket.
  2. Install the screws (3) securing the ICR to the bracket and tighten securely.
  3. Connect and fasten the two terminal ends to the ICR, then tighten the two nuts (2) to the proper specification.. Refer to TECHNICAL SPECIFICATIONS .
  4. Connect the wire harness connector (1) to the ICR.
  5. Connect the negative battery cable(s). Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals