Front Wheel Alignment Check And Adjustment: Toe-In

Standard value: 

At the center of tire tread: 1 ± 2 mm (0.04 ± 0.08 inch) 

Toe-in angle (per wheel): 0°02' ± 0°04' 

1. Loosen the lock nut with tie-rod bellows clip removed, and then perform the adjustment by turning the tie-rod left/right at the same degree in the opposite direction.
   NOTE: The toe moves to the outside by turning the tie-rod: left to the forward direction, and right to the reverse direction.
2. After adjustment, check that the steering angle is within the standard range using the turning radial gauge (- On-vehicle Service, STEERING ANGLE CHECK ).

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.