LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Outlander ES, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Multi Around Monitor) >> Diagnosis >> Data List Reference Table

Data List Reference Table

WARNING: This page is about a different car, the 2018 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Item No. Scan tool (M.U.T.-III) display Check condition Normal condition
1 Shift information Selector lever: except R position Not R
    Selector lever: R position R
2 Steering angle information A steering wheel angle signal is not received. Disable
    A steering wheel angle signal is received. Enable
3 Position light information Column switch (lighting switch): except TAIL OFF
    Column switch (lighting switch): TAIL ON
4 Vehicle speed information Vehicle stopped Disable
    Running Enable
5 Camera switch Camera switch: OFF OFF
    Camera switch: ON ON
6(1) Camera off request - OFF
    - ON
7 Steering wheel angle Vehicle stopped (the steering wheel is in the neutral position) -6 to 6 deg
    Running Nearly the same as the steering wheel operation angle <-720 to 720 deg>
8 Picture input signal (Front) Front-view camera signal is normal Normal
    Front-view camera signal is abnormal Abnormal
9 Picture input signal (Rear) Rear-view camera signal is normal Normal
    Rear-view camera signal is abnormal Abnormal
10 Picture input signal (Left side) Side-view camera (LH) signal is normal Normal
    Side-view camera (LH) signal is abnormal Abnormal
11 Picture input signal (Right side) Side-view camera (RH) signal is normal Normal
    Side-view camera (RH) signal is abnormal Abnormal
(1) are displayed, but not used for service and maintenance.