LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Outlander ES, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Front Axle) >> Special Tools >> Notes

Special Tools: Notes

WARNING: This page is about a different car, the 2018 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Tool Tool number and name Supersession Application
G05376061Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991618
Hub bolt remover		 General service tool Removal of the hub bolt
G05093329Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB990767
Front hub and flange yoke holder		 MB990767-01 Fixing of the hub
G08293428Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB992700
Lock nut chisel		 General service tool Raising up the swaged part driveshaft nut
G05376062Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991897 or MB992011
Ball joint remover		 MB991113-01, MB990635-01 or General service tool Knuckle and tie rod end ball joint disconnection
NOTE: Steering linkage puller (MB990635 or MB991113) is also used to disconnect knuckle and tie rod end ball joint.
G05376063Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB990241 Axle shaft puller
  1. MB990242 Puller shaft
  2. MB990244 Puller bar
 MB990241-01 or General service tool
  • Removal of the hub knuckle assembly
  • Removal of the driveshaft assembly
G05102601Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991354 Puller body General service tool
G12366968Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991056 or MB991355 Knuckle arm bridge MB991056-01 Removal of the hub
G05432045Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB992250 Knuckle arm bridge attachment - Removal of the hub
NOTE: Replace this attachment with a guide of MB991355 and use them.
G05376066Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 A: MB991017
B: MB990998
C: MB991000
A, B: Front hub remover and installer
C: Spacer		 MB990998-01
  • Removal of the hub
  • Provisional holding of the wheel bearing
  • Measurement of hub starting torque
  • Measurement of wheel bearing end play
    NOTE: MB991000, which belongs to MB990998, should be used as a spacer.
  • Removal of the wheel bearing inner race (outside) (Use MB991000 with MD998801.)
G12366971Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MD998801 Remover - Removal of the wheel bearing inner race (outside)
G12366972Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB992150 Oil seal installer - Installation of the wheel bearing inner race (outside)
G12366973Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MD998812 Installer cap -
G12366974Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MD998813
Installer		 -
G04872136Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB990925 Bearing and oil seal installer set MB990925-01 or General service tool Removal of the wheel bearing
G05376076Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB990890 Rear suspension bushing base MB990890-01 Installation of the wheel bearing
G12366977Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MD999528
Adapter		 -
G05376074Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991388
Bush remover base		 - Installation of the dust shield
G05376075Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991576
Base		 -
G05376067Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991099
Oil seal installer guide		 - Measurement of hub starting torque
G04871584Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB990326 Preload socket General service tool
G05376480Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
 MB991561
Boot band crimping tool		 MB991561 Boot (resin boot) band installation
scientia non olet · About LEMON Manuals