Keyless Entry System Inspection
Check the system as described below. If the system does not work, carry out troubleshooting. Refer to KEYLESS ENTRY SYSTEM DIAGNOSIS .
- Operate the transmitter to check that the doors can be locked and unlocked.
- Operate the transmitter to check when the door locking or unlocking operation is performed that the hazard warning light [lock: flash once, unlock: flash twice (default setting)] and dome light [lock: flash once, unlock: illuminates for 15 seconds (default setting)] answer back operates. Refer to
CUSTOMIZATION FUNCTION .NOTE:
- The customization function allows you to change the answer back setting as follows. Prior to that check, confirm which setting is activated.
- The hazard warning light flash once when locked and twice when unlocked (default setting).
- The hazard warning light flash once when locked and do not flash when unlocked.
- The hazard warning light do not flash when locked and flash twice when unlocked.
- The hazard warning light do not flash when both locked and unlocked.
- The hazard warning light flash twice when locked and once when unlocked.
- The hazard warning light flash twice when locked and do not flash when unlocked.
- The hazard warning light do not flash when locked and flash once when unlocked.
- The customization function allows you to change the answer back setting as follows. Prior to that check, confirm which setting is activated.