LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2019 >> Eclipse Cross SP >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication >> On-Vehicle Service >> Engine Oil Pressure Check

Engine Oil Pressure Check

  1. Check engine oil level (Refer to ON-VEHICLE SERVICE ).
  2. Remove the engine oil pressure switch (Refer to ENGINE OIL PRESSURE SWITCH ).
  3. Install the oil pressure gauge.
    NOTE: Use an adapter of PT 1/8 thread.
  4. Run the engine to warm it.
  5. After the engine has been warmed up, check that oil pressure is within the standard value.

    Standard value: 

    At idle: 29 kPa (4.2 psi) or more 

    At 3, 500 r/min: 294 - 686 kPa (43 - 100 psi) 

  6. Remove the oil pressure gauge.
  7. Install the engine oil pressure switch (Refer to ENGINE OIL PRESSURE SWITCH ).
scientia non olet · About LEMON Manuals