Controller Area Network (Can)
- General Information
- Special Tools
- Test Equipment
- Service Precautions
- Precautions On How To Repair The Can Bus Lines
- Explanation About The Scan Tool (M.U.T.-III) Can Bus Diagnostics
- Diagnostic Trouble Code Diagnosis
- Diagnosis
- Can Bus Diagnostics Table
- Can-Related Connector Position
- Can Bus Diagnostics
- DIAGNOSTIC ITEM 1: Communication error between the ETACS-ECU and all of the other ECUs over the CAN-C lines
- DIAGNOSTIC ITEM 2: Communication error between the ETACS-ECU and any of the other ECUs over the CAN-C lines
- DIAGNOSTIC ITEM 3: Diagnose when the scan tool cannot receive the data sent by gateway-ECU
- DIAGNOSTIC ITEM 4: Diagnose when the scan tool cannot receive the data sent by steering wheel sensor
- DIAGNOSTIC ITEM 5: Diagnose when the scan tool cannot receive the data sent by AWD-ECU
- DIAGNOSTIC ITEM 6: Diagnose when the scan tool cannot receive the data sent by FCM/LDW/AHB-ECU
- DIAGNOSTIC ITEM 7: Diagnose when the scan tool cannot receive the data sent by TCM
- DIAGNOSTIC ITEM 8: Diagnose when the scan tool cannot receive the data sent by ASC-ECU
- DIAGNOSTIC ITEM 9: Diagnose when the scan tool cannot receive the data sent by electric power steering-ECU
- DIAGNOSTIC ITEM 10: Diagnose when the scan tool cannot receive the data sent by ECM
- DIAGNOSTIC ITEM 11: Diagnose the lines between the ETACS-ECU and joint connector (CAN2)
- DIAGNOSTIC ITEM 12: Diagnose the lines between joint connector (CAN2) and joint connector (CAN3)
- DIAGNOSTIC ITEM 13: Diagnose when the scan tool cannot receive the data sent by smartphone link display audio
- DIAGNOSTIC ITEM 14: Diagnose when the scan tool cannot receive the data sent by KOS-ECU
- DIAGNOSTIC ITEM 15: Diagnose when the scan tool cannot receive the data sent by WCM
- DIAGNOSTIC ITEM 16: Diagnose when the scan tool cannot receive the data sent by OSS-ECU
- DIAGNOSTIC ITEM 17: Diagnose when the scan tool cannot receive the data sent by SRS-ECU
- DIAGNOSTIC ITEM 18: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU
- DIAGNOSTIC ITEM 19: Diagnose when the scan tool cannot receive the data sent by A/C control panel
- DIAGNOSTIC ITEM 20: Diagnose when the scan tool cannot receive the data sent by combination meter
- DIAGNOSTIC ITEM 21: Short to power supply or ground in both CAN_H and CAN_L lines of the CAN-B bus lines
- DIAGNOSTIC ITEM 22: Diagnose the ETACS-ECU, joint connector (CAN1) or lines between ETACS-ECU and joint connector (CAN1)
- DIAGNOSTIC ITEM 23: Short to power supply or ground, open circuit or line-to-line short in the CAN-B bus lines
- Can Communication-Related DTC (U-Code) Table
- Diagnosis
- Gateway-Ecu