LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2018 >> Outlander PHEV SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transaxle >> Front Transaxle >> Proportional Valve Check

Proportional Valve Check

  1. Measure the resistance between proportional valve connector terminals 1 and 2.

    Standard value: Approximately 5.3 Ω

  2. If not within the standard value, replace the valve body assembly.
G12376450Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals