Check Chart For Trouble Symptoms
| Trouble symptom | Inspection procedure No. | Reference | |
|---|---|---|---|
| Communication with M.U.T.-III is not possible. | Communication with engine control module is not possible. | - | COMMUNICATION WITH ECM ONLY IS NOT POSSIBLE <2.4L ENGINE>, COMMUNICATION WITH ECM ONLY IS NOT POSSIBLE <3.0L ENGINE> |
| WHEN THE BRAKE PEDAL IS DEPRESSED, CRUISE CONTROL IS NOT CANCELLED. | 1 | ||
| WHEN THE SELECTOR LEVER IS SET TO "N" POSITION, CRUISE CONTROL IS NOT CANCELLED. | 2 | ||
| WHEN THE CANCEL SWITCH IS PRESSED, CRUISE CONTROL IS NOT CANCELLED. | 3 | ||
| CRUISE CONTROL CANNOT BE SET (NO RESPONSE SET - SWITCH AND RES + SWITCH IS PRESSED). | 4 | ||
| HUNTING (REPEATED ACCELERATION AND DECELERATION) OCCURS AT THE SET VEHICLE SPEED. | 5 | ||
| WHEN THE CRUISE CONTROL ON/OFF SWITCH IS TURNED ON, THE CRUISE CONTROL INDICATOR LIGHT DOES NOT ILLUMINATE (HOWEVER, THE CRUISE CONTROL SYSTEM IS NORMAL). | 6 | ||
| WHEN THE CRUISE CONTROL SWITCH IS OPERATED, THE SYSTEM IS NOT TURNED ON. | 7 | ||