LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2018 >> Mirage G4 ES, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Supply >> On-Vehicle Service >> Fuel Tank Temperature Sensor Check

Fuel Tank Temperature Sensor Check

  1. Remove the rear seat cushion assembly (Refer to - REAR SEAT ASSEMBLY ).
  2. Remove the inspection lid.
    Fig 1: Locating Rear Seat Cushion Assembly
    G09628695Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Disconnect the fuel pump module connector.
    Fig 2: Locating Fuel Pump Module Connector
    G09628734Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Measure the resistance between connector terminals No. 1 and No. 3 of the fuel pump module (incorporating fuel tank temperature sensor).

    Standard value: 0.43 - 12.3 kΩ 

    [at -10 - 70°C (14 - 158°F)] 

  5. If not within the standard value, replace the fuel level sensor and fuel tank temperature sensor (Refer to DISASSEMBLY AND ASSEMBLY ).
  6. Connect the fuel pump module connector.
  7. Install the inspection lid.
  8. Install the rear seat cushion assembly (Refer to - REAR SEAT ASSEMBLY ).
Fig 3: Locating Fuel Pump Module Connector Terminals
G09628745Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals