LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2018 >> Eclipse Cross SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) (With Diagnostics) >> Special Tools

Special Tools

Tool Tool number and name Supersession Use
G12143652
  1. MB992744
  2. MB992745
  3. MB992747
  4. MB992748
M.U.T.-IIISE
  1. Vehicle communication interface-Lite (V.C.I.-Lite)
  2. V.C.I.-Lite main harness A (for vehicles with CAN communication)
  3. V.C.I.-Lite USB cable short
  4. V.C.I.-Lite USB cable long
 - CVT or S-AWC check (Diagnostic trouble code, data list)
G08294095
 MB992006 Extra fine probe - Continuity check and voltage measurement at harness wire or connector
G05102584
 MD998330 (a: MD998331) Oil pressure gauge (3.0 MPa, 435 psi) (a: Joint) MD998330-01 Hydraulic pressure measurement
G12147233
 MB992127 Joint -
G12147234
 MB995062 Flushing tool MLR-6906-C or Equivalent Flushing cooler and tube
G06471225
 MB992277 Clip remover Tool not available Disconnect the joint between the transaxle control cable and manual control lever
G12147236
 MB992075 Handle - Use with oil seal installer
G12147237
 MB992140 Oil seal installer - Installation of side oil seal
G12147238
 MB992206 Oil seal installer - Installation of side oil seal <FWD>
G12147239
 MB992906 Engine hanger attachment Tool not available Engine assembly support during transaxle assembly removal and installation
NOTE: Prepare two engine hanger attachments, MB992906.
G05431338
 MB991895 Engine hanger Tool not available
G08294158
 MB990784 Ornament remover General service tool Removal of transaxle control cable
scientia non olet · About LEMON Manuals