Removal And Installation

WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When removing or installing the crankshaft position sensor, be careful not to apply impact to the sensor.
Do not reuse the crankshaft position sensor that has been dropped.

Pre-removal Operation <Vehicles with A/C>

Drive Belt Removal (Refer to CRANKSHAFT PULLEY ).
A/C Compressor and Clutch Assembly Removal (Refer to ENGINE ASSEMBLY ).

Post-installation Operation <Vehicles with A/C>

A/C Compressor and Clutch Assembly Installation (Refer to ENGINE ASSEMBLY ).
Drive Belt Installation (Refer to CRANKSHAFT PULLEY ).

Fig 1: Crankshaft Position Sensor And Generator

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

For the removal and installation procedures, refer to WATER HOSE AND PIPE .