Radio And Cd Player-Related Error Code
WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
| Error code | Cause | Cause of trouble and its solution |
|---|---|---|
| CHECK DISC | Focus error | These error codes will be shown if there is any problem with the CD or there is excessive vibration on the vehicle. If the error codes are not displayed when the vehicle is stopped and another CD is inserted, there is a problem with the CD. Check if there is any of the following problems with the CD.
Repair the CD and insert it again. Then, check that no error appears. |
| DISC ERROR | Abnormal disc | |
| INTERNAL E | Mechanical error | This error codes will be shown if there is any internal mechanical or electrical problem in the radio and CD player. Replace the radio and CD player check that no error codes are shown. |
| HEAT ERROR | Protection against high temperature | If the internal temperature is extremely high, this error code will be shown. Turn off the radio and CD player and wait until they cool down. Wait for a while, and then turn on the unit again. Check that the same error does not appear. |
| ERROR DC | Detection abnormal output to the speaker | This error code will be shown if the radio and CD player has an internal malfunction (contaminated with the foreign material) or the speaker wiring harness is short-circuited, and abnormal signal is sent to the speaker. If it is contaminated with the foreign material, turn the power off. Dry the foreign material if it is liquid, and remove it if it is solid. If the speaker wiring harness is short-circuited, repair the wiring harness. Then, check if the error code is displayed. If the error code is displayed, replace the radio and CD player. |