Torque Specifications
WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification N.m |
|---|---|
| Transaxle | |
| Reverse shift arm bracket assembly mounting bolt | 17 ± 3 (13 ± 2 ft-lb) |
| Shift & select link mounting bolt | 18 ± 5 (13 ± 3 ft-lb) |
| Speed sensor mounting bolt <without ABS> | 10 ± 2 (89 ± 17 in-lb) |
| Fork shaft Shift fork mounting bolt | 16 ± 2 (12 ± 1 ft-lb) |
| Transaxle case | 30 ± 5 (22 ± 3 ft-lb) |
| Shift & select lever shaft assembly | 18 ± 5 (13 ± 3 ft-lb) |
| Rock ball assembly | 37 ± 11 (27 ± 8 ft-lb) |
| Reverse idler gear shaft mounting bolt | 30 ± 8 (22 ± 5 ft-lb) |
| Drain plug | 39 ± 11 (29 ± 8 ft-lb) |
| Back-up light switch | 41 ± 11 (30 ± 8 ft-lb) |
| Harness bracket bolt | 11 ± 3 (97 ± 26 in-lb) |
| Cable bracket mounting bolt | 18 ± 5 (13 ± 3 ft-lb) |
| Neutral position switch <with ABS> | 34 ± 5 (25 ± 3 ft-lb) |
| Selection bell crank mounting bolt | 19 ± 3 (14 ± 2 ft-lb) |
| Control housing | |
| Oil protect plate mounting bolt | 17 ± 5 (13 ± 3 ft-lb) |
| Differential | |
| Differential ring gear | 124 ± 7 (91 ± 5 ft-lb) |