Service Specifications
WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Standard value | Limit | ||
|---|---|---|---|---|
| Drive belt tension (When checked) | Vibration frequency Hz | Vehicles without A/C | 144 - 169 | - |
| Vehicles with A/C | 143 - 169 | - | ||
| Tension N (lb) | 490 - 686 (110.2 - 154.2) | - | ||
| Deflection mm (in) [Reference] | Vehicles without A/C | 8.3 - 10.5 (0.33 - 0.41) | - | |
| Vehicles with A/C | 8.5 - 10.9 (0.34 - 0.42) | - | ||
| Drive belt tension (When adjusted) | Vibration frequency Hz | Vehicles without A/C | 157 - 169 | - |
| Vehicles with A/C | 157 - 169 | - | ||
| Tension N (lb) | 588 - 686 (132.2 - 154.2) | - | ||
| Deflection mm (in) [Reference] | Vehicles without A/C | 8.3 - 8.9 (0.33 - 0.35) | - | |
| Vehicles with A/C | 8.5 - 9.3 (0.34 - 0.36) | - | ||
| Drive belt tension (When replaced) | Vibration frequency Hz | Vehicles without A/C | 192 - 202 | - |
| Vehicles with A/C | 192 - 202 | - | ||
| Tension N (lb) | 882 - 980 (198.3 - 220.3) | - | ||
| Deflection mm (in) [Reference] | Vehicles without A/C | 6.2 - 6.8 (0.25 - 0.26) | - | |
| Vehicles with A/C | 6.3 - 6.9 (0.25 - 0.27) | - | ||
| Basic ignition timing | 5° BTDC ±3° | - | ||
| Ignition timing | Approximately 8° BTDC | - | ||
| Idle speed r/min | M/T | 700 ± 50 | - | |
| CVT | 750 ± 50 | - | ||
| CO contents % | 0.5 or less | - | ||
| HC contents ppm | 100 or less | - | ||
| Valve clearance mm (in) | cold engine | Intake | 0.22 ± 0.04 (0.009 ± 0.001) | - |
| Exhaust | 0.30 ± 0.04 (0.012 ± 0.001) | - | ||
| Compression pressure kPa (psi) | at engine speed of 250 r/min | 1, 410 (205) | Minimum 950 (138) | |
| Compression pressure difference of all cylinders kPa (psi) | - | Maximum 98 (14) | ||
| Intake manifold vacuum kPa (in Hg) | - | Minimum 60 (17) | ||