>>E<< O-Ring/Water Pump Installation
- Carefully remove the drying material and other foreign materials on the installation groove for the water pump O-ring.
- Carefully remove the drying material and other foreign materials on the water pump installation area of the timing chain case assembly.
- Sufficiently apply water or coolant to the O-ring to prevent it from dropping using brushes.
- Securely fit the O-ring flange area into the installation groove of the water pump O-ring.
- Reverse the water pump carefully and check that the O-ring does not fall down.CAUTION: When installing the water pump, pay attention not to let the O-ring fall down or be bitten. Otherwise, a coolant leak may be caused.
- Install the water pump to the timing chain case assembly.