LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2018 >> Eclipse Cross SEL >> Repair and Diagnosis >> Engine Mechanical >> Intake And Exhaust >> Turbocharger Assembly >> Turbocharger Assembly Inspection >> Distortion Check

Distortion Check

  1. Check the turbocharger for damage and cracks, and replace it if necessary.
  2. Using a straight edge and a thickness gauge, check for distortion of the cylinder head and turbocharger installation surface.

    Limit: 

    0.70 mm (0.028 inch) or less <Cylinder head side> 

    0.40 mm (0.016 inch) or less <Turbocharger side> 

scientia non olet · About LEMON Manuals