Trouble Symptom Chart
CAUTION:
During diagnosis, a DTC associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
| Trouble symptom | Inspection procedure No. |
|---|---|
| Scan tool (M.U.T.-IIISE) cannot communicate with ETACS-ECU. | 1 |
| The ignition key cannot be registered using scan tool (M.U.T.-IIISE). | 2 |
| Engine does not start. | 3 |
| Check the power supply and ground circuit to the receiver antenna. | 4 |