Section 46 (Controller Area Network (Can))
WARNING: This page is about a different car, the 2017 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
- Special Tools
- Test Equipment
- Service Precautions
- Precautions On How To Repair The Can Bus Lines
- Explanation About The Scan Tool (M.U.T.-III) Can Bus Diagnostics
- Diagnostic Trouble Code Diagnosis
- Diagnosis
- Can Bus Diagnostics Table
- Can-Related Connector Position
- Can Bus Diagnostics
- DIAGNOSTIC ITEM 1: Communication With No ECUs Is Possible
- DIAGNOSTIC ITEM 2: Diagnose Shorts In The Power Supply To CAN Bus Line
- DIAGNOSTIC ITEM 3: Diagnose Shorts In The Ground To CAN Bus Line
- DIAGNOSTIC ITEM 4: Diagnose Shorts Between CAN_H And L Lines
- DIAGNOSTIC ITEM 5: Diagnose When The Scan Tool Cannot Receive The Data Sent By ETACS-ECU
- DIAGNOSTIC ITEM 6: Diagnose When The Scan Tool Cannot Receive The Data Sent By Combination Meter
- DIAGNOSTIC ITEM 7: Diagnose When The Scan Tool Cannot Receive The Data Sent By SRS-ECU
- DIAGNOSTIC ITEM 8: Diagnose When The Scan Tool Cannot Receive The Data Sent By KOS&OSS-ECU.
- DIAGNOSTIC ITEM 9: Diagnose When The Scan Tool Cannot Receive The Data Sent By Auto A/C Controller Assembly (A/C-ECU).
- DIAGNOSTIC ITEM 10: Diagnose When The Scan Tool Cannot Receive The Data Sent By Steering Wheel Sensor
- DIAGNOSTIC ITEM 11: Diagnose When The Scan Tool Cannot Receive The Data Sent By Occupant Classification-ECU
- DIAGNOSTIC ITEM 12: Diagnose The Lines Between The Joint Connectors (CAN1 and CAN2)
- DIAGNOSTIC ITEM 13: Diagnose When The Scan Tool Cannot Receive The Data Sent By EPS-ECU
- DIAGNOSTIC ITEM 14: Diagnose When The Scan Tool Cannot Receive The Data Sent By ASC-ECU
- DIAGNOSTIC ITEM 15: Diagnose When The Scan Tool Cannot Receive The Data Sent By Transaxle Control Module (TCM).
- DIAGNOSTIC ITEM 16: Diagnose When The Scan Tool Cannot Receive The Data Sent By Engine Control Module (ECM)
- Diagnostics Trouble Code (DTC) Reference Table