LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> RVR GT >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension & Wheel Alignment >> Shock Absorber Assembly >> Disassembly And Assembly >> Assembly Service Points >> Coil Spring Installation

Coil Spring Installation

  1. Install the coil spring end as shown in the figure, so that it should face the vehicle rearward.
    Fig 1: Installing Coil Spring End
    G05376228Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Set the shock absorber to special tools: MB991793, MB991796, MB991794 and MB991830, and slowly compress the coil spring while guiding the shock absorber piston rod through the hole on the upper spring bracket by hand:
    NOTE: Use the bolts and nuts removed from the vehicle to secure the shock absorber assembly and tighten them lightly by hand.
    Fig 2: Setting Shock Absorber To Special Tools
    G05394540Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals