Check Oil Level And Condition

1. Remove the filler plug and gasket.
2. Check that the oil level is up to the lower edge of the filler plug hole.
3. Check that the oil is not noticeably dirty.
4. Tighten the filler plug and new gasket, to the specified torque.

Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

Fig 1: Locating Filler Plug And Drain Plug For Transaxle

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Installing Filler Plug

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CHANGE 

1. Remove the filler plug and gasket.
2. Remove the drain plug and gasket, and drain the oil.
3. Tighten the drain plug and new gasket, to the specified torque.

   Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

4. Fill with DiaQueen NEW MULTI GEAR OIL API classification GL-3, SAE 75W-80 until the level comes to the lower portion of filler plug hole.

   Quantity:2.5 dm ³  (2.6 quarts) 

   Fig 3: Locating Filler Plug And Drain Plug For Transaxle

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
5. Tighten the filler plug and new gasket to the specified torque.

Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

Fig 4: Installing Filler Plug

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.