LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Outlander SE, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Headlight >> On-Vehicle Service >> Customization Function

Customization Function

Using the ETACS system of scan tool (M.U.T.-III), the following functions can be programmed. The programmed information is held even when the battery is disconnected.

Adjustment item (scan tool display) Adjustment item Adjusting content (scan tool display) Adjusting content
Turn power source Adjustment of turn-signal light operation condition ACC or IG1 Operable with ACC or ON position
IG1 Operable with ON position (initial condition)
Comfort flasher With/without comfort flasher function Disable No function
Enable With function (initial condition)
Hazard answer back Adjustment of the number of keyless hazard warning light answer back flashes Lock: 1, Unlock: 2 LOCK: Flashes once, UNLOCK: Flashes twice (initial condition)
Lock: 1, Unlock: 0 LOCK: Flashes once, UNLOCK: No flash
Lock: 0, Unlock: 2 LOCK: No flash, UNLOCK: Flash twice
Lock: 2, Unlock: 1 LOCK: Flash twice, UNLOCK: Flash once
Lock: 2, Unlock: 0 LOCK: Flash twice, UNLOCK: No flash
Lock: 0, Unlock: 1 LOCK: No flash, UNLOCK: Flash once
Lock: 0, Unlock: 0 No function
Sensitivity for auto light Lighting control sensor sensitivity (illumination intensity) <vehicles with lighting control sensor> Level 1 bright High-high ambient brightness
Level 2 bright High ambient brightness
Level 3 Standard ambient brightness (initial condition)
Level 4 dark Low ambient brightness
Level 5 dark Low-low ambient brightness
Headlight auto cut customize Adjustment of headlight automatic shutdown function Disable No function
Enable (C-spec.) With function (initial condition)
Comfort flasher switch time Switch operation time to activate the comfort flasher function Normal 0.4 second (initial condition)
Long 0.8 second
Coming home light Disabling or enabling coming home light function Disable No function
15 sec Headlight illuminates for 15 seconds.
30 sec Headlight illuminates for 30 seconds. (initial condition)
60 sec Headlight illuminates for 60 seconds.
180 sec Headlight illuminates for 180 seconds.
Welcome light Disabling or enabling welcome light function Disable No function
Small light Taillight illuminates. (initial condition)
Head light Headlight illuminates.