Removal And Installation
CAUTION:
- When removing or installing the crankshaft position sensor, be careful not to apply impact to the sensor.
- Do not reuse the crankshaft position sensor that has been dropped.
Pre-removal Operation <Vehicles with A/C>
- Drive Belt Removal (Refer to CRANKSHAFT PULLEY ).
- A/C Compressor and Clutch Assembly Removal (Refer to ENGINE ASSEMBLY ).
Post-installation Operation <Vehicles with A/C>
- A/C Compressor and Clutch Assembly Installation (Refer to ENGINE ASSEMBLY ).
- Drive Belt Installation (Refer to CRANKSHAFT PULLEY ).
For the removal and installation procedures, refer to WATER HOSE AND PIPE .