Brake Pad Check
WARNING: This page is about a different car, the 2017 Mitsubishi Lancer, 2016 Mitsubishi Lancer, and 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If there is a significant difference in thickness between the brake pads at right and left, check the sliding area and the run-out of the brake disc (Refer to LUBRICATION POINT BRAKE DISC CHECK
).
- Visually check the thickness of brake pad from the inspection hole of the caliper body.
Standard value: 10.0 mm (0.39 inch)
Limit: 2.0 mm (0.08 inch)
- If the brake pad thickness is less than the limit value, replace the brake pad (Refer to BRAKE PAD REPLACEMENT < EXCEPT RALLIART >
< Except RALLIART > or LUBRICATION POINT BRAKE PAD REPLACEMENT < RALLIART >
< RALLIART >).
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.