LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2016 >> RVR ES, Automatic CVT Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control (ASC) System - With Diagnostics >> Wheel Speed Sensor >> Inspection >> Wheel Speed Sensor Current Check

Wheel Speed Sensor Current Check

CAUTION: Do not connect the battery terminals in reverse as the wheel speed sensor may be damaged.
  1. Connect the circuit tester to the wheel speed sensor using the special tool extra fine probe (MB992006), and measure the sensor current as a single unit.

    Standard value: 5.9 to 8.4 mA or 11.8 to 16.8 mA 

  2. If the measurement value is not within the standard value range, replace the wheel speed sensor with a new one.
    Fig 1: Measuring Wheel Speed Sensor Current With Special Tool (MB992006)
    G09627151Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals