LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2016 >> Outlander GT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle On-Vehicle Service - With Diagnostics >> Transaxle Control >> Inspection >> Key Lock Relay Check (Vehicles Without Kos)

Key Lock Relay Check (Vehicles Without Kos)

  1. Shift the selector lever to P position.
  2. Use a jumper wire to connect terminal No. 5 of the selector lever assembly connector to the battery (+) terminal, terminal No. 6 to the battery (-) terminal. Then apply battery voltage.
  3. Check for continuity between the selector lever assembly connector terminals No. 4 and No. 5.
Jumper wire Continuity between terminals No. 4 and No. 5
Connect Yes (2 Ω or less)
Disconnect No
scientia non olet · About LEMON Manuals