Fastener/Clip Installation

If the quarter window glass assembly is reused, follow the procedures below:
1. Engage the clip with the body.
2. Cut off the convex portion of the quarter window glass assembly clip installation position.
  NOTE: If the quarter window glass assembly is installed without cutting off the convex portion of the quarter window glass assembly clip installation position, improper installation may result.
  
  CAUTION: Before the next operation, leave the decreased parts for 3 minutes or more to dry. Do not touch the degreased parts.
  
  Fig 1: Identifying Quarter Window Glass Assembly Convex Portion
  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Use parts cleaner (3M™ AAD Part number 8906 or equivalent) to degrease the inside circumference of the quarter window glass assembly and the body flanges.
Install the fasteners to the specified positions on the body flange.
Install the fasteners to the quarter window glass assembly at the positions which correspond to the fasteners on the body flange.