CD drive-related error
| Error messages | Cause | Cause of trouble and its solution |
|---|---|---|
| Cannot be played. Check the disk. |
Focus error | These error codes will be shown if there is any problem with the CD or there is excessive vibration on the vehicle. If the error codes are not displayed when the vehicle is stopped and another CD is inserted, there is a problem with the CD. Check if there is any of the following problems with the CD.
Repair the CD and insert it again. Then, check that no error appears. |
| Disk type error | ||
| Abnormal disc | ||
| Play is impossible due to high temperatures. Remove the disk, and wait a short while. |
Protection against high temperature | If the internal temperature is extremely high, this error code will be shown. Turn off the radio and CD player and wait until they cool down. Wait for a while, and then turn on the unit again. Check that the same error does not appear. |
| Play is impossible due to a mechanism error. | Abnormal load/eject | This error codes will be shown if there is any internal mechanical or electrical problem in the radio and CD player. Replace the radio and CD player check that no error codes are shown. |
| Power supply error | This error code will be shown if there is any problem in the power supply system of the radio and CD player. Check the connectors and wiring harness of the power supply system, and check that the battery voltage is normal. Check that the same error does not appear. |