LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2015 >> RVR ES, Standard Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Maintenance Service >> Manual Transaxle Oil >> Check Oil Level And Condition

Check Oil Level And Condition

  1. Remove the filler plug and gasket.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug and new gasket, to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 1: Identifying Engine Oil Filler And Drain Plug
    G05374019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Engine Oil Filler Plug Hole And Gasket
    G06672032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals