Regulator Assembly Installation

WARNING: This page is about a different car, the 2017 Mitsubishi Lancer, 2016 Mitsubishi Lancer, and 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

After installing the regulator assembly, insert a piece of wire through the hole in the rear bracket while pressing the brush to keep the brush against movement.

NOTE: Unless inserting the wire to fix the brush, the rotor installation is difficult.

Fig 1: Locating Regulator Assembly Wire Through Hole

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Rear Bracket, Wire And Brush

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.