Disassembly And Assembly: Notes

WARNING: This page is about a different car, the 2017 Mitsubishi Lancer, 2016 Mitsubishi Lancer, and 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disassembling/Assembling Transaxle Components With Torque Specification (1 Of 3)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Disassembling/Assembling Transaxle Components With Torque Specification (2 Of 3)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Disassembling/Assembling Transaxle Components With Torque Specification (3 Of 3)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tools:

MB992221: Puller set
MD998802: Input shaft Holder
MB990801: Rear axle bearing outer race puller
MB992038: Preload socket
MB992219: Output shaft adapter
MB992216: Installer
MB992220: Input shaft adapter
MB992212: Oil seal installer
MB992075: Handle
MB992000: Crankshaft adapter