LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2015 >> RVR ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Manual Transaxle On-Vehicle Service) >> On-Vehicle Service >> Transaxle Oil Level Check

Transaxle Oil Level Check

WARNING: This page is about a different car, the 2017 Mitsubishi Lancer, 2016 Mitsubishi Lancer, and 2015 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the filler plug and gasket.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug and new gasket, to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 1: Identifying Transaxle Oil Filler And Drain Plug
    G05374019Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Transaxle Oil Filler And Drain Plug
    G06672032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals