Option Coding
CAUTION:
- If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Pay attention to that the concerned functions and systems do not work normally if the setting does not correspond with the equipment.
- With the ETACS functions being customized, if any of the ETACS-ECU option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.
The ETACS-ECU option coding data can be checked or changed by operating scan tool (M.U.T.-III).
- How to check option coding data
- Connect the scan tool (M.U.T.-III). Refer to VARIANT CODING .
- Select "ETACS" on the system selection screen.
- Select "Coding."
- Select "Option Coding Information."
- Check the displayed option coding information.
- How to change option coding data
- Connect the scan tool (M.U.T.-III). Refer to VARIANT CODING .
- Select "ETACS" on the system selection screen.
- Select "Coding."
- Select "Option Coding."
- Change to correct option coding data.
BODY AND CHASSIS LIST
| Item name |
|---|
| Compressor type |
| Keyless entry |
| Remote engine starter |
| Panic Alarm |
| Manner Switch |
| Auto light control |
| RLS |
| DRL function |
| Front fog light |
| Rear fog light |
| Wiper washer check bulb |
| Horn type |
| ESS Cancel Function |