LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2015 >> Lancer Evolution Final Edition >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Electronic Control (AWD) - With Diagnostics >> Electronic Control Coupling >> Removal And Installation >> Installation Service Point >> Electronic Control Coupling Installation

Electronic Control Coupling Installation

  1. Check that the length of the electronic control coupling stud bolt (A) is within the standard value range.

    Standard value: 22.3 - 25.1 mm (0.88 - 0.99 inch) 

  2. If it exceeds either of the limits, clean the threads for the electronic control coupling and replace the stud bolt.

    Tightening torque: 15 ± 3 N.m (11 ± 2 ft-lb) 

    Fig 1: Measuring Electronic Control Coupling Stud Bolt Length
    G05432296Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals