LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> RVR SE, AWD >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Maintenance Service >> 11. Manual Transaxle Oil >> Check Oil Level And Condition

Check Oil Level And Condition

  1. Remove the filler plug and gasket.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug and new gasket, to the specified torque.

    Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb) 

    Fig 1: Identifying Filler Plug And Drain Plug
    G05374019
    Fig 2: Checking Transfer Oil Level
    G06672032
scientia non olet · About LEMON Manuals