Symptom Chart

NOTE: For additional Symptom Chart information, refer to TSB UPDATED CRUISE CONTROL DIAGNOSIS - SERVICE MANUAL REVISION .

Symptom	Inspection procedure number
Scan tool communication with ECM Is not possible.	Symptom Procedures - INSPECTION PROCEDURE 1
WHEN THE BRAKE PEDAL IS DEPRESSED, CRUISE CONTROL IS NOT CANCELLED.	1
WHEN THE CLUTCH PEDAL IS DEPRESSED, CRUISE CONTROL IS NOT CANCELLED < M/T. >	2
WHEN THE SELECTOR LEVER IS MOVED TO "N" POSITION, CRUISE CONTROL IS NOT CANCELLED < CVT. >	3
WHEN THE "CANCEL" SWITCH IS PRESSED, CRUISE CONTROL IS NOT CANCELLED.	4
CRUISE CONTROL CANNOT BE SET (NO RESPONSE "SET-" SWITCH AND "RES+" SWITCH IS PRESSED.)	5
HUNTING (REPEATED ACCELERATION AND DECELERATION) OCCURS AT THE SET VEHICLE SPEED < M/T >.	6
HUNTING (REPEATED ACCELERATION AND DECELERATION) OCCURS AT THE SET VEHICLE SPEED < CVT >.	7
WHEN "CRUISE ON/OFF" SWITCH IS TURNED "ON", "CRUISE" INDICATOR LIGHT INSIDE COMBINATION METER DOES NOT ILLUMINATE (HOWEVER, CRUISE CONTROL SYSTEM IS NORMAL.)	8