LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer Evolution MR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Cooling System - Lancer) >> Special Tools

Special Tools

WARNING: This page is about a different variant/trim than selected.
Tool Tool number and name Supersession Application
G06244449
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

Scan tool (M.U.T.-III sub assembly)
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Chrysler models only)
  6. M.U.T.-III measurement adapter
  7. M.U.T.-III trigger harness
 MB991824-KIT
NOTE: g: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
  • Checking diagnostic trouble code (DTC).
  • Checking actuator test.
G09625236
 MB991223
  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222

Harness set
  1. Test harness
  2. LED harness
  3. LED harness adaptor
  4. Probe
 General service tools Checking the continuity and measuring the voltage at the harness connector
G08294095
 MB992006
Extra fine probe		 General service tool Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
G09625238
 MB991871
LLC changer		 General service tool Coolant refilling
G09622714
 MB992042
Water temp sensor wrench		 MB992042-01 Engine coolant temperature sensor removal and installation
scientia non olet · About LEMON Manuals