LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2013 >> Lancer Evolution GSR >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Overhaul - Lancer Evolution >> Clutch Housing >> Disassembly And Assembly >> Assembly Service Points >> >>C<< Output Front Oil Guide Installation

>>C<< Output Front Oil Guide Installation

CAUTION:

Make sure that the output front oil guide is installed squarely.

Using special tool, MD999547, drive the oil guide all the way into place to the end face of the clutch housing.

Fig 1: Driving Oil Guide Into End Face Of Clutch Housing Using Special Tool MD999547
G05394042Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals