LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> i-MiEV ES >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) - With Diagnostics >> Wheel Speed Sensor >> Inspection >> Wheel Speed Sensor Insulation Check

Wheel Speed Sensor Insulation Check

  1. Remove the wheel speed sensor. Then, connect the circuit tester to the wheel speed sensor using the extra fine probe (special tool: MB992006), and measure the insulation resistance between the terminal No. 1/2 and the wheel speed sensor body.

    Standard value: 5 MΩ or more 

  2. If the insulation resistance is not within the standard value range, replace the wheel speed sensor with a new one.
    Fig 1: Measuring Insulation Resistance Between Terminal 1/2 And Wheel Speed Sensor Body
    G08297822Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals