LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> RVR ES >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Interior >> Sunshade Assembly >> On-Vehicle Service >> Sunshade Anti-Trap Function Check

Sunshade Anti-Trap Function Check

  1. In the center of the sunshade lid, place a piece of wood which is approximately 10-mm thick at a right angle against the sunshade lid, then close the sunshade.
  2. Check to see if the sunshade motor assembly turns in the opposite direction and the sunshade lid opens when the sunshade lid touches the wood chip. If any problem occurs, perform troubleshooting. (Refer to TROUBLESHOOTING  (+)
scientia non olet · About LEMON Manuals