Customization Function
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
PROGRAMMABLE FUNCTIONS
| Adjustment item (scan tool display) | Adjustment item | Adjusting contents (scan tool display) | Adjusting contents |
|---|---|---|---|
| Door unlock mode | Adjustment of power door locks with selective unlocking < Vehicles with keyless entry system > | All doors unlock | Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors. |
| Dr door unlock | With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors. (initial condition) | ||
| Auto door unlock | Adjustment of the auto door unlock function | Disabled | Without function (initial condition) < M/T, CVT > |
| Always (P pos) | With function: Operates when the shift lever or the selector lever is moved to the P position. < CVT > | ||
| Always (Lock pos) | With function: Operates when the ignition switch is moved to the LOCK (OFF) position. < M/T, CVT > |