LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Outlander ES >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Column Shaft Assembly >> Removal And Installation >> Installation Service Points >> >> A << Steering Column Shaft Assembly Installation

>> A << Steering Column Shaft Assembly Installation

  1. Ensure that the tilt lever is in the lock position.
  2. Temporarily tighten the mounting bolts in the order of a, b, and c, and then tighten them in the order of c, b, and a to the specified torque.

    Tightening torque a: 28 ± 7 N.m (21 ± 5 ft-lb) 

    Tightening torque b, c: 12 ± 3 N.m (106 ± 26 in-lb) 

    Fig 1: Identifying Steering Column Shaft Assembly Bolts Tightening Sequence
    G07044370Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals