Special Tools
SPECIAL TOOLS
| Tool | Tool number and name | Supersession | Application |
|---|---|---|---|
MB991955
M. U. T.-III Sub Assembly
|
MB991824-KIT
NOTE:
G: MB991826 M. U. T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
|
CAUTION:
For vehicles with CAN communication, use M. U. T.-III main harness A to send simulated vehicle speed. If you connect M. U. T.-III main harness B instead, the CAN communication does not function correctly. Power steering system air bleeding (Calibration by using the scan tool) |
|
| MB991897 or MB992011 Ball joint remover |
MB991113-01, MB990635-01 or General service tool | Knuckle and tie rod end ball joint disconnection
NOTE:
Steering linkage puller (MB990635 or MB991113) is also available to disconnect knuckle and tie rod end ball joint.
|
|
| MB990326 Preload socket |
General service tool | Tie rod end ball joint breakaway torque check | |
| MB991548 Power steering oil pressure gauge adapter (Pump side) |
MB991548-01 | Oil pump pressure test | |
| MB991549 Power steering oil pressure gauge adapter (Hose side) |
MB991549-01 | ||
| MB990662 Power steering oil pressure gauge |
MB990662-01 | ||
| MB990784 Ornament remover |
General service tool | Cover removal | |
| MB990803 Steering wheel puller |
General service tool | Steering wheel removal | |
| MB990228 or MB991006 Preload socket |
MB990228-01 | Steering gear total pinion torque check | |
| MB990925 Bearing and oil seal installer set |
MB990925-01 or general service tool |
|
|
| MB991203 Oil seal and bearing installer |
Tool not available | Oil seal and bearing installation | |
| MB992209 Bellows band crimping tool |
MB992209 | Bellows band installation | |
| MB992249 | Variable spanner | Tie-rod removal and installation |