Rear Wheel Alignment Check And Adjustment: Toe-In

Standard value: 3 ± 2 mm (0.12 ± 0.08 inch) 

It toe-in is not within the standard value, adjust by following procedures.

1. Be sure to adjust the camber before making toe adjustment. Turn the adjusting bolt (toe adjusting bolt: control link mounting bolt which is located on the inner side of the body) to adjust.

   Left wheel: Turning clockwise →(+) toe-in 

   Right wheel: Turning clockwise →(-) toe-in 

   Fig 1: Identifying Control Link & Adjusting Bolt

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.