LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Lancer Evolution MR >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2007 GALANT 2.4L, Outlander >> Pattern 25 >> Test Procedure

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Let the engine idle at the engine speed less than 1,000 r/min for 15 seconds. (During the monitor)
  3. Turn the ignition switch to "LOCK" (OFF) position.
  4. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals