LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Lancer Evolution MR >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2007 GALANT 2.4L, Outlander >> Pattern 19 >> Test Procedure

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the vehicle for 10 minutes at the following condition. (During the monitor)
    • Engine speed: More than 1,700 r/min
    • Engine load: More than 31%
  3. Stop the vehicle in a safe place and turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals