LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2012 >> Lancer Evolution MR >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) - Lancer Evolution >> On-Vehicle Service >> G And Yaw Rate Sensor Calibration >> Vehicles Without TC-SST

Vehicles Without TC-SST

  1. Park the vehicle on a level surface.
  2. Turn the ignition switch to the ON position.
  3. Turn the ignition key to the LOCK (OFF) position.
    CAUTION: Before connecting or disconnecting scan tool, always turn the ignition switch to the LOCK (OFF) position.
  4. Check that the ignition key is in the LOCK (OFF) position, and then set scan tool.
  5. Turn the ignition switch to the ON position.
  6. On the Menu, select "System selection."
  7. On the "System selection," select "ABS/ASC/ASTC/WSS" in the "System table," and then click the "OK" button.
  8. In the "ABS/ASC/ASTC/WSS" field, select "Special function".
  9. In the "Special function," select "Learn sensor neutral position."
  10. Among the selected items, select "Learn G-sensor neutral position" and then press the "OK" button.
  11. "Learn G-sensor neutral position: Are you sure to execute the selected item?
    NOTE: Check the execution conditions." is displayed. Then, press the "OK" button.
  12. "Execute command: Executed" is displayed. Then, press the "OK" button.
  13. Among the selected items, select "Learn lateral G-sensor neutral position" and then press the "OK" button.
  14. "Learn lateral G-sensor neutral position: Are you sure to execute the selected item?
    NOTE: Check the execution conditions." is displayed. Then, press the "OK" button.
  15. "Execute command: Executed" is displayed. Then, press the "OK" button.
  16. The neutral point is learned.
  17. Turn the ignition key to the LOCK (OFF) position, and remove scan tool from the vehicle.
scientia non olet · About LEMON Manuals