Trouble Symptom Chart For Input Signal

WARNING: This page is about a different variant/trim than selected.

TROUBLE SYMPTOM CHART

Trouble symptom		Inspection Procedure
ETACS-ECU does not receive any signal from the ignition switch (ACC).		Refer to INSPECTION PROCEDURE 1: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE IGNITION SWITCH (ACC).
ETACS-ECU does not receive any signal from the ignition switch (IG1).		Refer to INSPECTION PROCEDURE 2: MALFUNCTION OF THE IGNITION SWITCH (IG1) INPUT/OUTPUT SIGNAL
ETACS-ECU does not receive any signal from the key reminder switch.		Refer to INSPECTION PROCEDURE 3: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE KEY REMINDER SWITCH.
ETACS-ECU cannot receive the signal of front door lock actuator (LH) or front door lock actuator (RH).		Refer to INSPECTION PROCEDURE 4: ETACS-ECU CANNOT RECEIVE THE SIGNAL OF FRONT DOOR LOCK ACTUATOR (LH) OR FRONT DOOR LOCK ACTUATOR (RH).
ETACS-ECU does not receive any signal from the front door switch (LH).		Refer to INSPECTION PROCEDURE 5: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE FRONT DOOR SWITCH (LH).
ETACS-ECU does not receive any signal from the front door switch (RH).		Refer to INSPECTION PROCEDURE 6: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE FRONT DOOR SWITCH (RH).
ETACS-ECU does not receive any signal from the rear door switch (LH).		Refer to INSPECTION PROCEDURE 7: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE REAR DOOR SWITCH (LH).
ETACS-ECU does not receive any signal from the rear door switch (RH).		Refer to INSPECTION PROCEDURE 8: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE REAR DOOR SWITCH (RH).
ETACS-ECU does not receive any signal from the trunk lid actuator and switch.	LANCER	Refer to INSPECTION PROCEDURE 9: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE TRUNK LID ACTUATOR AND SWITCH. < LANCER >
ETACS-ECU does not receive any signal from the liftgate switch.	LANCER SPORTBACK	Refer to INSPECTION PROCEDURE 9: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE LIFTGATE SWITCH. < LANCER SPORTBACK >
ETACS-ECU does not receive any signal from the hazard warning light switch.		Refer to INSPECTION PROCEDURE 10: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE HAZARD WARNING LIGHT SWITCH.
ETACS-ECU does not receive any signal from the column switch signal.		Refer to INSPECTION PROCEDURE 11: ETACS-ECU DOES NOT RECEIVE ANY SIGNAL FROM THE COLUMN SWITCH SIGNAL.